Cheney Engineering - Flat Track Racing Accessories

Shop Phone: (641) 459-2212 ~ Located in Central Standard Time Zone
Race Shop Hours: open 9:00am to Noon CST ~ Closed for Lunch ~ open 1:00pm to 5:00pm CST

Brake Products

Front & Rear Brake Assembly

Front Brake Assembly Kit:
comes with fork leg bracket, stainless steel braided brake hose, brake lever, handle bar control, master cylinder, disk center, brake disk (9 1/2", 10", or 12") and CRF450 twin piston caliper.

When ordering, will need to provide length of brake hose (eye-to-eye).

Price:

$ 600 assembly

Rear Brake Assembly Kit with Nissin Caliper & Nissin Master Cylinder:
comes with all components shown: disk brake (9 1/2", 10", or 12"), aluminum brake center, stainless steel braided brake line, mounting plate for Nissin caliper, Nissin master cylinder, banjo bolts, hydraulic line bolts, black hose, and brake fluid reservoir.

Price:

$ 600 assembly

Rear Brake Assembly Kit with Nissin 2 Rotor Rear & Nissin Caliper:
comes with all components: disk brake (9 1/2", 10", or 12"), aluminum brake center, stainless steel braided brake line, mounting plate for Nissin caliper, Nissin master cylinder, banjo bolts, hydraulic line bolts, black hose, and brake fluid reservoir.

Price:

$ 655 assembly

Rear Brake Assembly Kit with Grimeca Caliper & Nissin Master Cylinder:
comes with all components shown: disk brake, aluminum brake center, stainless steel braided brake line, mounting plate for Nissin caliper, master cylinder, banjo bolts, hydraulic line bolts and brake fluid reservoir.

Price:

$ 610 assembly

Rear Brake Assembly Kit with Grimeca 2-piece old-sytle Caliper Bracket, Grimeca Caliper, Nissin Master Cylinder with Drag Link:
comes with all components shown: disk brake, aluminum brake center, stainless steel braided brake line, mounting plate for caliper, master cylinder, banjo bolts, hydraulic line bolts, drag link and brake fluid reservoir.

When ordering, will need to provide rod length.

Price:

$ 640 assembly

Brake Caliper Hanger Bracket for Bembo Caliper (Brembo caliper not included)

Price:

12" Brake Disk with Caliper Bracket (Brembo caliper not included) $210 combo

10 1/2" Brake Disk with Caliper Bracket (Brembo caliper not included) $210 combo

10 1/2" or 12" Brake Disk with Front Caliper Bracket (Brembo caliper not included) $210 combo

Front Brake Caliper Hanger Brackets (caliper not included)

Front Brake Hanger is designed for the fork tubes that have mounting bolts located higher up the fork tube. It is also bi-directional allowing you to decide if you would like the set the caliper in front or behind the fork tubes.

Price:

$48 - $80

Brake Disk

Various Sizes for various bikes available

Price:

9 1/2" Disk $ 145 each

10 1/2" Disk $ 155 each

12" Disk $ 135 each

12" Disk New Style $ 165 each

12" Floating Disk Ventilated with center for TT Hub or Quick Change Rear

Price:

$215

12" Ventilated Disc for Quick Change Rear

Price:

$170

10 1/2" Disk for Quick Change Rear Thickness = 4.5 mm

Price:

$155

12" Disk for Quick Change Rear Thickness = 4.5 mm

Price:

$175

Pull Brake Assembly

Pull Style Brake Assembly for Grimeca master Cylinder. Comes with the mounting bracket, Adjustable brake lever and footpeg. The brake lever mounts under the foot peg and angles upward so it is level with the peg. As seen in the picture, there is an extra hole below the black pivot bolt so you have an optional mounting position which moves the lever down.

Price:

Complete assembly $ 149 kit

lever alone $ 35 each

Push Brake Assembly

Push Style Brake Assembly with mounting spuds that are welded onto the frame. This assembly comes with the mounting bracket, brake lever and footpeg.

Price:

$ 149 each

Bracket for Grimeca (pull-type) or Nissin (push-type) Master Cylinders

Footrest/Brake Lever Bracket for Nissin Master Cylinder.

TOP PICTURE: Bracket without the three mounting holes comes with steel spuds to weld on to your frame, then drill the bracket to fit the spuds.

MIDDLE PICTURE: picture is the Bracket with Mount holes already drilled.

BOTTOM PICTURE: Grimeca Bracket with Mount holes already drilled. Also available without mount holes drilled and mounting spuds.

Available in Anodized Gold or Silver; with or without mounting holes.

Price:

Bracket with steel spuds and screws $ 80 each

Bracket with Mount holes drilled $ 65 each

Brake Caliper Brackets

Available in Silver

Price:

1. Mini CR80 Caliper Bracket    $ 48 each

2. Nissin above Swing Arm - 45 degree forward    $ 75 each

3. Nissin below Swing Arm    $ 75 each

4. Grimeca Brake Caliper Bracket (Frame Mount)    $ 75 each

5. Grimeca Brake Caliper Bracket ( Mount)    $ 65 each

Brake Caliper Brackets for Brembo Brake Calipers

Bracket for 10 1/2" Disk and Brembo Brake Caliper

Price:

$ 85 each

Bracket for 12" Disk and Brembo Brake Caliper

Price:

$ 85 each

Brembo Brake Caliper Hanger for 10 1/2" or 12" Disk

Price:

$ 85 each

Brake Caliper Brackets for Nissin Brake Calipers

45 degree Bracket for Nissin Caliper. This bracket only works with single shock set-ups. Unfortunately on a dual shock set-up, the shock, mount bracket, and caliper get in the away of each other.

Price:

$ 85 each

Nissan Caliper Bracket for a Flat Track Framer 9 1/2", 10 1/2", or 12" Disk (Hanging)

Price:

$ 85 each

Nissan Caliper Bracket for a Flat Track Framer 10 1/2" Disk (Hanging)

Price:

$ 85 each

Nissan Caliper Bracket for Flat Track Framer 12" Disk (Verticle)

Price:

$ 85 each

Nissan Caliper Bracket for Flat Track Framer 12" (Hanging)

Price:

$ 85 each

Vertical Nissan Caliper Bracket for 12" disc
Left-side mount (Rotax, etc...)

Price:

$ 85 each

Nissan 45 degree Caliper Bracket for 9 1/2", 10 1/2" and 12" (Hanging)
comes with floating axle spacer (not shown)

Price:

$ 85 each

Nissin 2-Piston Caliper Rear Bracket
for 9 3/4", 10 1/2" or 12" Discs

Price:

$ 85 each

Honda Mini-Bike Brake Caliper Brackets

Honda CR80 Caliper Bracket for Quick Change Mini-Bike Rear Wheel

Price:

$ 48 each

Honda CRF150 Caliper Bracket

Price:

$ 85 each

Old-Style Grimeca Caliper Bracket (Hanging or Vertical)

TOP PICTURE: Standard Bracket

SECOND PICTURE: 2-Piece Bracket which provides for a 1/4" offset on either side of the mount bracket.

THIRD PICTURE: 45 degree Forward and down bracket. Works with the dual shock setups. Will also work in the upward position for bikes with a single shock set-up.

Available for both a 10 1/2" or 12" Brake Disk.

Price:

one-piece bracket (10 1/2" disk only) (top picture) $ 75 each

two-piece bracket (10 1/2" or 12" disks) (second picture) $ 85 each

45 degree bracket (10 1/2" or 12" disks) (third picture) $ 85 each

Front Grimeca Brake Caliper Brackets

Universal : Type I

Price:

$ 60 each

Universal : Type II

Price:

$ 50 each

Vertical Front Brake Hangers

These vertical Front Brake Hangers work with Honda CRF450 calipers, Nissin Calipers to Ceriani-Betor forks, etc...

Price:

$ 48 each

Universal front fork brake caliper hanger bracket for Honda designed for Nissan 2-piston front caliper. Configured for a narrow bolt pattern (2005 and newer).

Price:

$ 48 each

Universal front fork brake caliper hanger bracket for Honda designed for Nissan 2-piston front caliper. configured for a wide bolt pattern (2004 and older).

Price:

$ 48 each

Universal front fork brake caliper hanger bracket (left or right side mount).

Price:

$ 34 each

Bracket for Nissan 2-Piston Front Caliper to 36mm EX500 Forks :

Top Bracket for 101 bolt center

Bottom Bracket for 77 bolt center

Caliper not included

Price:

$ 65each

Drag Link and Brake Lever Rod:

TOP PICTURE: Drag link for Gremica, Kelsey Hayes, hurst Airhart brake, etc... Mounts on the hanger bracket and holds the brake in position (like we had ~30 years ago).

SECOND PICTURE: Extra brake arm bar. Mounts between the brake pedal and arm on the Grimeca pull-type master cylinders.

Price:

Arm $ 30 each

Drag Link (eyes at both ends) $ 45 each

Both $ 75 kit

Disk Centers:

12" Disk Center for Barnes-type Quick Change hubs with 4 mounting holes also available with 8 mounting holes (6 lightening holes)

Price:

$ 65 each

Disk Center for Honda CRF450. Adapts a Honda CRF450 front disk to a Rear Quick Change Wheel.

Price:

$ 65 each

Honda CRF85 Sprocket on Quick Change Wheel

Price:

$ 65 each

Honda CRF150 Front Brake Disk Center to TT Hub.

Price:

$ 65 each

Honda CRF150 Rear Brake Disk Center to quick Change wheel.

Price:

$ 65 each

Honda CRF Rear Disk adapter (8-prong and 8 holes). This setup works with PM, Mercury and one-piece hub/wheels.

Price:

$ 65 each

Honda CRF Rear Disk Adapter (4-hole)

Price:

$ 65 each

Yamaha YZF450 Front Disk to TT or Mini-Bike Hubs (6-prong)

Price:

$ 65 each

Yamaha YZF450 Front Disk to Rear Quick Change Hub. This setup will require you to remount your caliper.

Price:

$ 65 each

Kawasaki KX 250/450 front disk center for front brake on TT Hub

Price:

$ 65 assembly

Kawasaki KX 250/450 front disk center for Quick Change Rear Wheel

Price:

$ 65 assembly

Disc Center for EBC 9 3/4" Disc to Front TT Hub

Price:

$ 65 each

Disc Center for EBC 9 3/4" Disc to Rear Quick Change Hub

Price:

$ 65 each

Brake Levers:

TOP PICTURE:
  Cheney Frame Long lever,
  Cheney Frame Short lever,
  C&J lever,
  Grimeca Pull lever

SECOND PICTURE:
  Under the peg lever which curves upward to raise the toe 1 1/4"

THIRD PICTURE:

Price:

Nissan Long Brake Lever    $ 35 each

Nissan Short Brake Lever    $ 35 each

C&J Brake Lever    $ 80 each

Grimeca Brake Lever    $ 35 each

Under Curved Up Brake Lever    $ 35 each

Lower Long Brake Pedal (Top)
Lower Short Brake Pedal (2nd from Top)
Top Curved Brake Pedal (3rd from Top) available in both Long and Short lengths
Pull type Brake Pedal Lower (4th from Top)
Lower Long Brake Pedal Curved up 1" (Bottom)

Price:

$ 35 each

Top Curved Brake Pedal - available in both Long and Short

Price:

$ 35 each

Yamaha YZF450 under foot peg brake lever (2006 thru 2009).

Price:

"Above" or "Under" levers with extension $ 55 each

Replacement extension $ 15 each

Honda CRF450 curved lever.

Price:

Honda CRF450 curved lever $ 55 each

Modern Bike "above" and "under" the foot rest brake pedals with extensions

Price:

"Above" or "Under" levers with extension $ 55 each

Replacement extension $ 15 each

Lowered Right Foot Peg Conversion for Modern Bikes

Honda CRF450 Lowered Right-side Footpeg:
Lower right-hand direct extention flat track footrest conversion lowers the right-side foot peg down 2" and forward 1". The relocation kit includes the linkage for the repositioning, mounting block and rubber foot peg.

$125 Kit w/o brake lever

$145 with Brake Lever

Kawasaki KXF450 Lowered Right-side Footpeg:
Lower right-hand direct extention flat track footrest conversion lowers the right-side foot peg down 2" and forward 1". The relocation kit includes the linkage for the repositioning, mounting block and rubber foot peg.

$125 Kit w/o brake lever

$145 with Brake Lever

KTM 450 Lowered Right-side Footpeg:
This lowered footpeg is designed for the bike original footpeg mounts to slide into two slots which are then again used for mounting the new lowered footpeg.

$125 Kit w/o brake lever

$145 with Brake Lever

Yamaha YZF450 (2006 or newer) Lowered Right-side Footpeg:
Lower right-hand direct extention flat track footrest conversion lowers the right-side foot peg down 2" and forward 1". Works with Yamaha 2006 and newer YZF450. The relocation kit includes the linkage for the repositioning, mounting block and rubber foot peg.

$150 with Brake Lever

Yamaha YZF450 (2006 or newer) Lowered Right-side Footpeg with Upward curved brake pedal:
Lower right-hand footrest conversion lowers the right-side foot peg down 2" and forward 1". Works with Yamaha 2006 and newer YZF450. The relocation kit includes the linkage for the repositioning, multi-position mounting block, rubber foot peg and brake lever (required).

$150 with Brake Lever

Yamaha YZF450 or YZF426 (2003-2005)(steel frame) Lowered Right-side Footpeg:
This lowered footpeg is designed for the bike original footpeg mounts to slide into two slots which are then again used for mounting the new lowered footpeg. Pictures #2 and #3 display mounting on the bike.

$145 with Brake Lever

NEW 7 degree angle blade & 1 1/2" longer lowered footpeg:
We have fabricated a new lowered footpeg that has a blade angle of 7 degrees and also is 1 1/2 inches longer. These longer blade pegs work with any of our Modern Bike Foot Peg in place of the standard foot pegs. This peg also comes with the rubber.

$ 36 New 7 degree blade with rubber Lever

Modern Bike Left-Side Foot Peg Kit

Left-Side Foot Peg for Modern Bikes: This kit comes with 2 steels spuds so you can weld this directly to your steel frame bike.

Price:

$ 100 Kit

Modern Bike Left-Side Replacement Foot Peg

Left-Side Replacement Rubber Covered Foot Peg for Modern Bikes. Works with Honda CRF, Yamaha YZF, Kawasaki KX and KTM.

Right-side replacement foot pegs also available.

Price:

$ 65 each

Foot Peg Set

These are the various Foot Peg set available for either Flat Track style and vintage bikes. These sets include the rubber and both the left and right pegs.

TOP PICTURE: The top set is the Steel Foot Pegs and rubbers. The foot pegs in the lower left corner are the modern bike standard pegs and the a Modern Bike lowered foot peg is pictured in the lower left corner of the picture.

BOTTOM PICTURE: Flat Track aluminum foot pegs with a 3/8" mounting bolt.

Price:

Modern Bike Lowered Foot Peg (right-side)    $ 125-130 set

Modern Bike Lowered Foot Peg (right-side) with brake lever    $145-150 set

Steel Foot Pegs w/rubber    $ 90 set

   $ 50 each

Flat Track and Vintage Foot Pegs    $ 110 set

   $ 55 each

Flat Track Aluminum Foot Pegs (bottom picture)    $ 115 set

   $ 60 each

Rubber Only    $ 20 ea

Sales & Service
13359 N Hwy 183
Suite 406 - PMB 180
Austin, TX 78750
(512) 751-8811
Carlyn K. Cheney

Design & Fabrication
21716 117th Lane
Bloomfield, IA 52537
Jerry Cheney - 81k
Jeremey Cheney